1 - 4 Cu Ft FINE MESH WATER SOFTENING RESIN - FOR CLEAR WATER IRON

FINE MESH High Capacity Water Softening Resin 15000 - 16000 Grain Capacity- WATER SOFTENER WILL REMOVE APPROXIMATELY 3-6 PPM OF CLEAR IRON

CATION Standard and Fine Mesh resin is a highcapacity, conventional gel polystyrene strong acid cation exchange resin designed for use in residential or industrial water softening equipment. Cation resin in sodium form removes hardness ions such as calcium and magnesium by replacing them with sodium. When the resin bed is exhausted the hardness ions being to pass through the bed. Functionality is returned by regeneration with concentrated sodium or potassium chloride solution. The capacity obtained depends largely on the amount of salt used in the regeneration. Typically 15 lbs of chemical per ft3 is used to obtain maximum capacity of up to 33,000 grains per ft3.

GRAVEL AND FUNNEL RECOMMENED TO MAKE THE RESIN REPLACEMENT WORK BETTER AND EASE ANY PROBLEMS. IN ADDITION, IF YOU ARE GOING FROM STANDARD RESIN TO FINE MESH RESIN, YOU HAVE TO CHANGE YOUR BASKET. IF YOU HAVE A SMALL DISTRIBUTOR YOU MUST CHANGE THE RISER TUBE. THEREFORE, SELECT THE PIPE SIZE SO WE CAN SEND THE RIGHT MATERIAL